Alarm.com Flex-100-AT LTE Cellular Standalone Sensor (ATT)

Name: Alarm.com Flex-100-AT LTE Cellular Standalone Sensor (ATT)
SKU: S-ADC-FLEX-100-AT
Availability: InStock

$144.95

The Alarm.com Flex IO™ sensor enables new levels of flexibility for monitoring valuable property and assets anywhere that LTE connectivity is available. Whether used with a backyard gate or a remote storage unit, the Alarm.com Flex IO™ sensor empowers users to keep an eye on what matters most. It can be used with the included magnet to monitor doors, gates, and other entryways. It also comes equipped with input and output options for integrating compatible devices that lack long-range connectivity. No alarm panel required since it can operate standalone or with an existing Alarm.com account.

SKU: S-ADC-FLEX-100-AT Categories: Door and Window, Surface Tag: Alarm.com

Description

Overview

Features

Detect open/close using magnetic reed switch
Detect state change for third-party device using Loop Input
Change state of third-party and device using Relay Output (requires DC power to support always-on cellular connection)

In the box

Optional EOL (end of line) resistor to detect cut wires. EOL resistor can be 300 kΩ or higher. Normally Open configuration is preferred for low power usage.
Optional mount tamper and battery door tamper alerts
Multiple mounting options, including screws or zip ties.
Multiple carrier options:
- Verizon (US only)
- AT&T (US and Canada)

Specifications

Ingress Protection	IP56
Temperature	Battery life will be optimal between temperatures of 32°F to 140°F (0°C to 60°C), though the device can operate from -40°F to 140°F (-40°C to 60°C).
Reed Switches	3 unique reed switch locations to choose from that can be activated with included magnet.
Loop Input	The Alarm.com Flex IO™ sensor can be powered by battery or external power. Dry Contact, Normally Open (NO), or Normally Closed (NC). Optional EOL resistor can be 300 kΩ or higher.
Relay Output	If used, the Alarm.com Flex IO™ sensor must be externally powered (not compatible with battery power). Up to 24 V (AC or DC), 40 mA max current. Can be used only for control lines/dry contact.Caution: Can never be connected directly to control electrical loads. This will damage the device.
Dimensions	Main unit: 6.8 x 2.2 x 1.3″ (17.3 x 5.6 x 3.3 cm). Magnet: 3.1 x 0.68 x 0.87″ (7.9 x 1.7 x 2.2 cm).
Power	Works with DC-wired power or battery power (battery backup recommended for wired installations). 6 to 15 VDC supply. Minimum 1 A.
Battery Power	Four 1.5 V AA lithium batteries (iron disulfide). 2+ years of battery life, depending on battery chemistry and operating temperature.