Did you know its possible to cut your ADT alarm monitoring bill by more than HALF without long-term contracts?  We takeover existing ADT hardwired alarm panels everyday moving their former customers to our low-cost UL central stations without requiring contracts or expensive alarm system replacement.

ADT has used many different brands and models of alarm systems over the years but in many cases we can monitor your system at substantially lower monthly rates.  ADT systems include DSC, Honeywell, Interlogix, SafeWatch Pro 3000 and others.  We are DIY focused and can guide you through the process over the telephone and can generally remote program your system saving you from the cost and burden of a technician coming to your home.  We have been in the home security business for 35 years now and only use redundant UL certified central stations to securely and reliability protect your home.

My ADT Alarm System

If you are not sure what alarm system you have installed just “click” the button below to help identify it by picture.  We show all the major wireless and hardwired panels used the past 20 years.

Please Note:  The newer ADT Command Center panels are proprietary and only ADT can monitor them unfortunately.

Save Money

For control panels with a working landline, alarm monitoring starts at only $8.95.  If using Internet its $12.95, and for cellular just $14.95.  We have many options for interactive services (remote control of your alarm system via cell phone app) that vary with make and model of your existing system.

NOTE: As with any alarm monitoring takeover it is necessary to know the “Installer Code” for your particular alarm panel.  This important code is used to modify the account number and telephone numbers (for landlines) programmed into the alarm panel.  If this code is unknown its an easy matter to reset the code for example with Honeywell systems.  With others the “default” installer code may still be active.  If in doubt give us a call to understand if your Installer Code can be reset or use this link to see if the default Installer Code is still active.

Keep Your Existing Alarm Equipment

All existing equipment such as the alarm panel, keypads, sensors, etc. can still be used with our service.  The only potential exception is an Internet or cellular alarm communicator which if installed originally by ADT are proprietary and can only be used with an expensive ADT central station.  The good news this single component is easy to replace allowing you to save significantly month after month.

Surveillance

Security cameras are proprietary to the interactive service company in use.  This means if you have ADT surveillance cameras they can ONLY be used with ADT interactive services.  The ADT salesman probaby forgot to mention this critical detail in the sales presentation. 

Remote Control of Your Security System

Depending on your alarm system or Internet/cellular communicator in use we have multiple options for interactive Services (remote control) of your panel.  We are an authorized security dealer with all the major players for interactive services:  Alarm.com, Honeywell Total Connect 2, Alula, SecureNet, Telguard, Uplink, and Connect24.  Just click any of the links above for specific service pricing and options.

Cellular Communicator Replacement/Upgrade

For recommended cellular communicators if an ADT model must be replaced see our Upgrade Existing Systems page. Just click the button below!

Easy Same-Day Switch!

We are here 9am – 8pm EST, 7 days a week handling alarm monitoring takeovers

Free Technical Support

Want to discuss your particular setup or requirements?  Just give us a call!

800-840-6150

Alarm.com Cellular Alarm Monitoring

We include more Alarm.com options than anyone else.

Don’t be fooled.  Not all Alarm.com dealers are the same!

We have the web’s best pricing and feature mix for Alarm.com interactive services combined with true UL central station alarm monitoring.  If you own a compatible system from Qolsys, 2GIG, GE/Interlogix, DSC, or Honeywell we can help you start saving today!  If you don’t have an Alarm.com cellular (or dual-path) communicator installed check our Alarm Communicator page to see if you can add one.

Note: Existing Verizon 3G/CDMA communicators can no longer be activated (or reactivated) after June 30, 2019.  Currently activated cards will continue to operate until the Verizon 3G network shutdown December 31, 2022.  For new activations after the cutoff date you will need either a Verizon LTE or AT&T LTE cellular communicator.  Be aware many panels require a firmware update in order to use an LTE card.

No Contract Alarm.com Alarm Monitoring Pricing

* Pricing shown includes a 15% annual pre-pay discount.  A one-time $15 activation fee applies to all new Alarm.com accounts.

* Compatible with Alarm.com communicators only

• Self

  Basic

  Mobile App Control

  No Central Station Dispatch

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.

• $ 13.95 Cell and IP

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• Cellular Connectivity

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• No Contract

  We offer all alarm monitoring plans with NO CONTRACTS. No long-term, multi-year commitments. We do offer pre-pay discounts for annual (15%) or just go month to month. Your choice and never any pressure to change.
• Daily Supervision

  Monitor panel connectivity with signal supervision between the control panel and Alarm.com to know when a panel is not responding.
• Remote Arming/Disarming

  Arm/disarm system remotely via web or mobile apps.
• System Status and Summary of Recent Activity

  View an at-a-glance summary showing the current system status and any recent activity at the property via web or mobile apps
• User Code Management

  Add/delete/edit user codes remotely, and track which users arm/disarm the system at what times. For systems with multiple partitions, choose which partition(s) each user code can access.
• Searchable 60-Day Event History

  Search a 60-day history of events reported by the system, including alarms and other activity, via web or mobile apps. Customize the time frame of the search, and filter by device or event type. Download results as HTML or Excel files.
• Multiple Permission-Based Web Logins

  Create different “sub-users” for the account and grant varying levels of permissions for each user to view/change various settings in the Alarm.com online account.
• Multiple Partition Support

  For compatible GC3, iotega, IQ Panel 2, Concord, NetworX, and Neo control panels with multiple partitions, arm or disarm individual partitions via the web, add and assign new user codes to a specific set of partitions, see which sensors are in which partition, and filter the online event history by partition.
• Multi-System Access

  Access multiple security systems from a single account through a convenient drop-down menu in the Alarm.com online account and mobile apps. Great for primary home and vacation home.
• Alarms

  Receive email/text message notifications for any type of alarm reported by the security system. These automated alarm alerts are in addition to the emergency response services provided by our UL central monitoring station.
• Arming/Disarming

  Receive email/text message notifications from Alarm.com when the security system is armed or disarmed. These messages are not forwarded to our UL central station for action of logging.
• System Events

  Receive email/text message notifications for power failures, sensor tampers and malfunctions, panel low battery, and other types of system events.
• No-Show Alerts

  Receive email/text message notifications if a certain person did not disarm the security system during selected times on chosen days.
• Arming Reminders

  Receive email/text message notifications if the security system is not armed by a particular time on chosen days.
• Geo-Services

  Intelligently trigger arming reminders and events based on Geo-Fence settings and mobile phone location.
• Sensor Activity Monitoring - 50 Sensors

  Even when the security system is disarmed, receive email/text message notifications for non-alarm activity reported by sensors including: door, window, cabinet, motion, and other various sensors. The Alarm.com module communicates ALL sensor and system activity that occurs 24/7 to Alarm.com’s Network Operations Centers, then sends customized notifications to selected recipients.
• Sensor-Left-Open

  Receive email/text message notifications if a particular door, cabinet, or window sensor is left open for an extended period during specified time frames. Receive a Restoral Notification once the sensor is closed again.

Sign Up

• Self

  Enhanced

  Mobile App Control

  No Central Station Dispatch

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.

• $ 15.95 Cell and IP

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• Cellular Connectivity

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• No Contract

  We offer all alarm monitoring plans with NO CONTRACTS. No long-term, multi-year commitments. We do offer pre-pay discounts for annual (15%) or just go month to month. Your choice and never any pressure to change.
• Daily Supervision

  Monitor panel connectivity with signal supervision between the control panel and Alarm.com to know when a panel is not responding.
• Remote Arming/Disarming

  Arm/disarm system remotely via web or mobile apps.
• System Status and Summary of Recent Activity

  View an at-a-glance summary showing the current system status and any recent activity at the property via web or mobile apps
• User Code Management

  Add/delete/edit user codes remotely, and track which users arm/disarm the system at what times. For systems with multiple partitions, choose which partition(s) each user code can access.
• Searchable 60-Day Event History

  Search a 60-day history of events reported by the system, including alarms and other activity, via web or mobile apps. Customize the time frame of the search, and filter by device or event type. Download results as HTML or Excel files.
• Multiple Permission-Based Web Logins

  Create different “sub-users” for the account and grant varying levels of permissions for each user to view/change various settings in the Alarm.com online account.
• Multiple Partition Support

  For compatible GC3, iotega, IQ Panel 2, Concord, NetworX, and Neo control panels with multiple partitions, arm or disarm individual partitions via the web, add and assign new user codes to a specific set of partitions, see which sensors are in which partition, and filter the online event history by partition.
• Multi-System Access

  Access multiple security systems from a single account through a convenient drop-down menu in the Alarm.com online account and mobile apps. Great for primary home and vacation home.
• Alarms

  Receive email/text message notifications for any type of alarm reported by the security system. These automated alarm alerts are in addition to the emergency response services provided by our UL central monitoring station.
• Arming/Disarming

  Receive email/text message notifications from Alarm.com when the security system is armed or disarmed. These messages are not forwarded to our UL central station for action of logging.
• System Events

  Receive email/text message notifications for power failures, sensor tampers and malfunctions, panel low battery, and other types of system events.
• No-Show Alerts

  Receive email/text message notifications if a certain person did not disarm the security system during selected times on chosen days.
• Arming Reminders

  Receive email/text message notifications if the security system is not armed by a particular time on chosen days.
• Geo-Services

  Intelligently trigger arming reminders and events based on Geo-Fence settings and mobile phone location.
• Sensor Activity Monitoring - 50 Sensors

  Even when the security system is disarmed, receive email/text message notifications for non-alarm activity reported by sensors including: door, window, cabinet, motion, and other various sensors. The Alarm.com module communicates ALL sensor and system activity that occurs 24/7 to Alarm.com’s Network Operations Centers, then sends customized notifications to selected recipients.
• Sensor-Left-Open

  Receive email/text message notifications if a particular door, cabinet, or window sensor is left open for an extended period during specified time frames. Receive a Restoral Notification once the sensor is closed again.
• Unexpected Activity Alerts

  Receive alerts whenever unexpected activity occurs, based on learned activity patterns. Alerts based on user face recognition are also available on select panels only and require the customer to opt in.
• Lights

  Send commands to turn lights on/off via web or mobile apps. Create automated light schedules to have specific lights turn on at certain times, for specified lengths of time. Create rules so a specific light turns on if a certain sensor is activated.
• Locks

  Remotely control door locks via web or mobile apps, see lock status (locked/unlocked) and receive email/text message notifications when a lock is accessed by a specific user.
• Thermostats

  Remotely control thermostat(s) via web or mobile apps and easily create custom schedules to set temperatures based on time of day, day of week, activity patterns and the status of the security system to make properties run more efficiently
• Garage Door Control

  Remotely manage and control garage doors via web or mobile apps. View garage door status, receive garage door alerts and close automatically when system is armed.
• Irrigation Control

  Remotely monitor and control Rain Bird or Rachio irrigation systems from the mobile app.
• Audio Integration

  Use the mobile app to control music and audio from the Legrand On-Q® Digital Audio System
• LiftMaster® Integration

  Integration with any supported LiftMaster product
• Lutron® Integration

  Integration with any supported Lutron product.

Sign Up

• Dispatch

  Simple

  No Mobile App Control

  Central Station Dispatch

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.

• $ 14.95 Cell and IP

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• Cellular Connectivity

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• UL Central Station

  We have trained operators ready to respond and verify your alarm signals 24x7x365. This includes burglary alarms, life safety such as fire and CO, status signals (AC loss), and environmental alerts such as low temperature or flood detection. Upto 75 zones of protection which is more than you'll ever need!
• No Contract

  We offer all alarm monitoring plans with NO CONTRACTS. No long-term, multi-year commitments. We do offer pre-pay discounts for annual (15%) or just go month to month. Your choice and never any pressure to change.
• Daily Supervision

  Monitor panel connectivity with signal supervision between the control panel and Alarm.com to know when a panel is not responding.
• Telephone Notification

  Receive alarm notifications by telephone. The central status will notify you or a family member/relative, neighbor etc. from your Call List if authorities were dispatched.

Sign Up

• Dispatch

  Basic

  Mobile App Control

  Central Station Dispatch

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.

• $ 17.95 Cell and IP

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• Cellular Connectivity

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• UL Central Station

  We have trained operators ready to respond and verify your alarm signals 24x7x365. This includes burglary alarms, life safety such as fire and CO, status signals (AC loss), and environmental alerts such as low temperature or flood detection. Upto 75 zones of protection which is more than you'll ever need!
• No Contract

  We offer all alarm monitoring plans with NO CONTRACTS. No long-term, multi-year commitments. We do offer pre-pay discounts for annual (15%) or just go month to month. Your choice and never any pressure to change.
• Telephone Notification

  Receive alarm notifications by telephone. The central status will notify you or a family member/relative, neighbor etc. from your Call List if authorities were dispatched.
• Crash & Smash Protection

  Alarm.com exclusive and patented technology, enables alarm signal transmission to the Central Station even if the security system is destroyed or disabled by an intruder. This happens during the dialer delay period on the WSF package and during dialer delay period, entry delay or alarm dialing process on the I, I+A and IG packages.
• Daily Supervision

  Monitor panel connectivity with signal supervision between the control panel and Alarm.com to know when a panel is not responding.
• Remote Arming/Disarming

  Arm/disarm system remotely via web or mobile apps.
• System Status and Summary of Recent Activity

  View an at-a-glance summary showing the current system status and any recent activity at the property via web or mobile apps
• User Code Management

  Add/delete/edit user codes remotely, and track which users arm/disarm the system at what times. For systems with multiple partitions, choose which partition(s) each user code can access.
• Searchable 60-Day Event History

  Search a 60-day history of events reported by the system, including alarms and other activity, via web or mobile apps. Customize the time frame of the search, and filter by device or event type. Download results as HTML or Excel files.
• Multiple Permission-Based Web Logins

  Create different “sub-users” for the account and grant varying levels of permissions for each user to view/change various settings in the Alarm.com online account.
• Multiple Partition Support

  For compatible GC3, iotega, IQ Panel 2, Concord, NetworX, and Neo control panels with multiple partitions, arm or disarm individual partitions via the web, add and assign new user codes to a specific set of partitions, see which sensors are in which partition, and filter the online event history by partition.
• Multi-System Access

  Access multiple security systems from a single account through a convenient drop-down menu in the Alarm.com online account and mobile apps. Great for primary home and vacation home.
• Alarms

  Receive email/text message notifications for any type of alarm reported by the security system. These automated alarm alerts are in addition to the emergency response services provided by our UL central monitoring station.
• Arming/Disarming

  Receive email/text message notifications from Alarm.com when the security system is armed or disarmed. These messages are not forwarded to our UL central station for action of logging.
• System Events

  Receive email/text message notifications for power failures, sensor tampers and malfunctions, panel low battery, and other types of system events.
• No-Show Alerts

  Receive email/text message notifications if a certain person did not disarm the security system during selected times on chosen days.
• Arming Reminders

  Receive email/text message notifications if the security system is not armed by a particular time on chosen days.
• Geo-Services

  Intelligently trigger arming reminders and events based on Geo-Fence settings and mobile phone location.
• Sensor Activity Monitoring - 50 Sensors

  Even when the security system is disarmed, receive email/text message notifications for non-alarm activity reported by sensors including: door, window, cabinet, motion, and other various sensors. The Alarm.com module communicates ALL sensor and system activity that occurs 24/7 to Alarm.com’s Network Operations Centers, then sends customized notifications to selected recipients.
• Sensor-Left-Open

  Receive email/text message notifications if a particular door, cabinet, or window sensor is left open for an extended period during specified time frames. Receive a Restoral Notification once the sensor is closed again.

Sign Up

• Dispatch

  Enhanced

  Mobile App Control

  Central Station Dispatch

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.

• $ 19.95 Cell and IP

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• Cellular Connectivity

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• UL Central Station

  We have trained operators ready to respond and verify your alarm signals 24x7x365. This includes burglary alarms, life safety such as fire and CO, status signals (AC loss), and environmental alerts such as low temperature or flood detection. Upto 75 zones of protection which is more than you'll ever need!
• No Contract

  We offer all alarm monitoring plans with NO CONTRACTS. No long-term, multi-year commitments. We do offer pre-pay discounts for annual (15%) or just go month to month. Your choice and never any pressure to change.
• Telephone Notification

  Receive alarm notifications by telephone. The central status will notify you or a family member/relative, neighbor etc. from your Call List if authorities were dispatched.
• Crash & Smash Protection

  Alarm.com exclusive and patented technology, enables alarm signal transmission to the Central Station even if the security system is destroyed or disabled by an intruder. This happens during the dialer delay period on the WSF package and during dialer delay period, entry delay or alarm dialing process on the I, I+A and IG packages.
• Daily Supervision

  Monitor panel connectivity with signal supervision between the control panel and Alarm.com to know when a panel is not responding.
• Remote Arming/Disarming

  Arm/disarm system remotely via web or mobile apps.
• System Status and Summary of Recent Activity

  View an at-a-glance summary showing the current system status and any recent activity at the property via web or mobile apps
• User Code Management

  Add/delete/edit user codes remotely, and track which users arm/disarm the system at what times. For systems with multiple partitions, choose which partition(s) each user code can access.
• Searchable 60-Day Event History

  Search a 60-day history of events reported by the system, including alarms and other activity, via web or mobile apps. Customize the time frame of the search, and filter by device or event type. Download results as HTML or Excel files.
• Multiple Permission-Based Web Logins

  Create different “sub-users” for the account and grant varying levels of permissions for each user to view/change various settings in the Alarm.com online account.
• Multiple Partition Support

  For compatible GC3, iotega, IQ Panel 2, Concord, NetworX, and Neo control panels with multiple partitions, arm or disarm individual partitions via the web, add and assign new user codes to a specific set of partitions, see which sensors are in which partition, and filter the online event history by partition.
• Multi-System Access

  Access multiple security systems from a single account through a convenient drop-down menu in the Alarm.com online account and mobile apps. Great for primary home and vacation home.
• Alarms

  Receive email/text message notifications for any type of alarm reported by the security system. These automated alarm alerts are in addition to the emergency response services provided by our UL central monitoring station.
• Arming/Disarming

  Receive email/text message notifications from Alarm.com when the security system is armed or disarmed. These messages are not forwarded to our UL central station for action of logging.
• System Events

  Receive email/text message notifications for power failures, sensor tampers and malfunctions, panel low battery, and other types of system events.
• No-Show Alerts

  Receive email/text message notifications if a certain person did not disarm the security system during selected times on chosen days.
• Arming Reminders

  Receive email/text message notifications if the security system is not armed by a particular time on chosen days.
• Geo-Services

  Intelligently trigger arming reminders and events based on Geo-Fence settings and mobile phone location.
• Sensor Activity Monitoring - 50 Sensors

  Even when the security system is disarmed, receive email/text message notifications for non-alarm activity reported by sensors including: door, window, cabinet, motion, and other various sensors. The Alarm.com module communicates ALL sensor and system activity that occurs 24/7 to Alarm.com’s Network Operations Centers, then sends customized notifications to selected recipients.
• Sensor-Left-Open

  Receive email/text message notifications if a particular door, cabinet, or window sensor is left open for an extended period during specified time frames. Receive a Restoral Notification once the sensor is closed again.
• Unexpected Activity Alerts

  Receive alerts whenever unexpected activity occurs, based on learned activity patterns. Alerts based on user face recognition are also available on select panels only and require the customer to opt in.
• Lights

  Send commands to turn lights on/off via web or mobile apps. Create automated light schedules to have specific lights turn on at certain times, for specified lengths of time. Create rules so a specific light turns on if a certain sensor is activated.
• Locks

  Remotely control door locks via web or mobile apps, see lock status (locked/unlocked) and receive email/text message notifications when a lock is accessed by a specific user.
• Thermostats

  Remotely control thermostat(s) via web or mobile apps and easily create custom schedules to set temperatures based on time of day, day of week, activity patterns and the status of the security system to make properties run more efficiently
• Garage Door Control

  Remotely manage and control garage doors via web or mobile apps. View garage door status, receive garage door alerts and close automatically when system is armed.
• Irrigation Control

  Remotely monitor and control Rain Bird or Rachio irrigation systems from the mobile app.
• Audio Integration

  Use the mobile app to control music and audio from the Legrand On-Q® Digital Audio System
• LiftMaster® Integration

  Integration with any supported LiftMaster product
• Lutron® Integration

  Integration with any supported Lutron product.

Sign Up

• Dispatch

  Gold

  Mobile App Control

  Central Station Dispatch

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.

• $ 22.95 Cell and IP

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• Cellular Connectivity

  Enables wireless alarm signal communication to the central station as the primary or redundant signal path. No phone line or Internet connection is needed.
• UL Central Station

  We have trained operators ready to respond and verify your alarm signals 24x7x365. This includes burglary alarms, life safety such as fire and CO, status signals (AC loss), and environmental alerts such as low temperature or flood detection. Upto 75 zones of protection which is more than you'll ever need!
• No Contract

  We offer all alarm monitoring plans with NO CONTRACTS. No long-term, multi-year commitments. We do offer pre-pay discounts for annual (15%) or just go month to month. Your choice and never any pressure to change.
• Telephone Notification

  Receive alarm notifications by telephone. The central status will notify you or a family member/relative, neighbor etc. from your Call List if authorities were dispatched.
• Crash & Smash Protection

  Alarm.com exclusive and patented technology, enables alarm signal transmission to the Central Station even if the security system is destroyed or disabled by an intruder. This happens during the dialer delay period on the WSF package and during dialer delay period, entry delay or alarm dialing process on the I, I+A and IG packages.
• Daily Supervision

  Monitor panel connectivity with signal supervision between the control panel and Alarm.com to know when a panel is not responding.
• Remote Arming/Disarming

  Arm/disarm system remotely via web or mobile apps.
• System Status and Summary of Recent Activity

  View an at-a-glance summary showing the current system status and any recent activity at the property via web or mobile apps
• User Code Management

  Add/delete/edit user codes remotely, and track which users arm/disarm the system at what times. For systems with multiple partitions, choose which partition(s) each user code can access.
• Searchable 60-Day Event History

  Search a 60-day history of events reported by the system, including alarms and other activity, via web or mobile apps. Customize the time frame of the search, and filter by device or event type. Download results as HTML or Excel files.
• Multiple Permission-Based Web Logins

  Create different “sub-users” for the account and grant varying levels of permissions for each user to view/change various settings in the Alarm.com online account.
• Multiple Partition Support

  For compatible GC3, iotega, IQ Panel 2, Concord, NetworX, and Neo control panels with multiple partitions, arm or disarm individual partitions via the web, add and assign new user codes to a specific set of partitions, see which sensors are in which partition, and filter the online event history by partition.
• Multi-System Access

  Access multiple security systems from a single account through a convenient drop-down menu in the Alarm.com online account and mobile apps. Great for primary home and vacation home.
• Alarms

  Receive email/text message notifications for any type of alarm reported by the security system. These automated alarm alerts are in addition to the emergency response services provided by our UL central monitoring station.
• Arming/Disarming

  Receive email/text message notifications from Alarm.com when the security system is armed or disarmed. These messages are not forwarded to our UL central station for action of logging.
• System Events

  Receive email/text message notifications for power failures, sensor tampers and malfunctions, panel low battery, and other types of system events.
• No-Show Alerts

  Receive email/text message notifications if a certain person did not disarm the security system during selected times on chosen days.
• Arming Reminders

  Receive email/text message notifications if the security system is not armed by a particular time on chosen days.
• Geo-Services

  Intelligently trigger arming reminders and events based on Geo-Fence settings and mobile phone location.
• Sensor Activity Monitoring - 50 Sensors

  Even when the security system is disarmed, receive email/text message notifications for non-alarm activity reported by sensors including: door, window, cabinet, motion, and other various sensors. The Alarm.com module communicates ALL sensor and system activity that occurs 24/7 to Alarm.com’s Network Operations Centers, then sends customized notifications to selected recipients.
• Sensor-Left-Open

  Receive email/text message notifications if a particular door, cabinet, or window sensor is left open for an extended period during specified time frames. Receive a Restoral Notification once the sensor is closed again.
• Unexpected Activity Alerts

  Receive alerts whenever unexpected activity occurs, based on learned activity patterns. Alerts based on user face recognition are also available on select panels only and require the customer to opt in.
• Lights

  Send commands to turn lights on/off via web or mobile apps. Create automated light schedules to have specific lights turn on at certain times, for specified lengths of time. Create rules so a specific light turns on if a certain sensor is activated.
• Locks

  Remotely control door locks via web or mobile apps, see lock status (locked/unlocked) and receive email/text message notifications when a lock is accessed by a specific user.
• Thermostats

  Remotely control thermostat(s) via web or mobile apps and easily create custom schedules to set temperatures based on time of day, day of week, activity patterns and the status of the security system to make properties run more efficiently
• Garage Door Control

  Remotely manage and control garage doors via web or mobile apps. View garage door status, receive garage door alerts and close automatically when system is armed.
• Irrigation Control

  Remotely monitor and control Rain Bird or Rachio irrigation systems from the mobile app.
• Audio Integration

  Use the mobile app to control music and audio from the Legrand On-Q® Digital Audio System
• LiftMaster® Integration

  Integration with any supported LiftMaster product
• Lutron® Integration

  Integration with any supported Lutron product.
• Image Capture on Alarm

  Capture motion activated images during system alarm events; up to 5 sets of images are automatically uploaded per event.
• Image Capture on Disarm

  Capture images during disarm events. Images can be uploaded to the image gallery.
• Daily Views Rules

  Create rules to upload and send motion activated images captured during a specific time period.
• Additional Image Upload

  Upload additional images that were captured by the sensors and not automatically uploaded, such as extra alarm, entry delay or disarm images.
• Image Alerts

  Receive email/text message image alerts on images captured during alarms, Daily Views, or Peek-In requests.

Sign Up

Interactive Self-Monitoring

We have the web’s best pricing and feature mix for Alarm.com self-monitored interactive services.  If you own a compatible system from Qolsys, 2GIG, GE/Interlogix, DSC, or Honeywell we can help you start saving today!  If you don’t have an Alarm.com cellular (or dual-path) communicator installed check our Alarm Communicator page to see if you can add one.

Self-monitored security systems are exactly what they sound like, they are alarm systems you technically monitor yourself.  The key advantage is the cost savings over a professional UL central station dispatch plan while still retaining the modern interactive features that Alarm.com and their smartphone app provides. This includes not only notification of alarms and trouble issues at home received on the Alarm.com app but also remote arm and disarm control of your security system plus Z-Wave home automation and video options as well.

In areas where police response can be very slow the motivation for central station dispatch may not be very strong.  Its not for everyone. Many people just want interactive control of their alarm and home automation devices.

Keep in mind “you” are responsible for calling your local police, fire, or medical departments in the event of an emergency at home with self-monitoring.  If you miss the app alert on your phone or out of a WIFI or cellular service area an emergency may not be acted upon, at least in a timely manner.  This is why we always recommend 24×7 UL central station dispatch to customers.  Few insurance companies offer the typical 10% – 20% annual discount on premiums with self-monitored alarm systems.

For customers outside of the US our self-monitoring Alarm.com plans can be used anywhere in the world.  In the US connectivity to Alarm.com is via cellular or dual-path cellular / Internet.  But as long as you have Internet connectivity to Alarm.com you can use their interactive app and self-monitor a compatible system from outside the US!

Note: Existing Verizon 3G/CDMA communicators can no longer be activated (or reactivated) after June 30, 2019.  Currently activated cards will continue to operate until the Verizon 3G network shutdown December 31, 2022.  For new activations after the cutoff date you will need either a Verizon LTE or AT&T LTE cellular communicator.  Be aware many panels require a firmware update in order to use an LTE card.

No Contract Alarm.com Self-Monitoring Pricing

* Pricing shown includes a 15% annual pre-pay discount.  A one-time $15 activation fee applies to all new Alarm.com accounts.

* Compatible with Alarm.com communicators only

Self Interactive Basic

$13.95and up*

$13.95and up*

• Cellular Connectivity

  Enables wireless alarm signal communication to Alarm.com as the primary or redundant signal path. No phone line or Internet connection is needed. US only.
• No Contract

  We offer all alarm monitoring plans with NO CONTRACTS. No long-term, multi-year commitments. We do offer pre-pay discounts for annual (15%) or just go month to month. Your choice and never any pressure to change.
• Crash & Smash Protection

  Alarm.com exclusive and patented technology, enables alarm signal transmission even if the security system is destroyed or disabled by an intruder. This happens during dialer delay period, entry delay or alarm dialing process on the Self-Interactive-Basic, Self-Interactive-Enhanced and Self-Interactive Gold packages.
• Daily Supervision

  Monitor panel connectivity with signal supervision between the control panel and Alarm.com to know when a panel is not responding.
• Remote Arming/Disarming

  Arm/disarm system remotely via web or mobile apps.
• System Status and Summary of Recent Activity

  View an at-a-glance summary showing the current system status and any recent activity at the property via web or mobile apps
• User Code Management

  Add/delete/edit user codes remotely, and track which users arm/disarm the system at what times. For systems with multiple partitions, choose which partition(s) each user code can access.
• Searchable 60-Day Event History

  Search a 60-day history of events reported by the system, including alarms and other activity, via web or mobile apps. Customize the time frame of the search, and filter by device or event type. Download results as HTML or Excel files.
• Multiple Permission-Based Web Logins

  Create different “sub-users” for the account and grant varying levels of permissions for each user to view/change various settings in the Alarm.com online account.
• Multiple Partition Support

  For compatible GC3, iotega, IQ Panel 2, Concord, NetworX, and Neo control panels with multiple partitions, arm or disarm individual partitions via the web, add and assign new user codes to a specific set of partitions, see which sensors are in which partition, and filter the online event history by partition.
• Multi-System Access

  Access multiple security systems from a single account through a convenient drop-down menu in the Alarm.com online account and mobile apps. Great for primary home and vacation home.
• Alarms

  Receive email/text message notifications for any type of alarm reported by the security system.
• Arming/Disarming

  Receive email/text message notifications from Alarm.com when the security system is armed or disarmed.
• System Events

  Receive email/text message notifications for power failures, sensor tampers and malfunctions, panel low battery, and other types of system events.
• No-Show Alerts

  Receive email/text message notifications if a certain person did not disarm the security system during selected times on chosen days.
• Arming Reminders

  Receive email/text message notifications if the security system is not armed by a particular time on chosen days.
• Geo-Services

  Intelligently trigger arming reminders and events based on Geo-Fence settings and mobile phone location.
• Sensor Activity Monitoring - 50 Sensors

  Even when the security system is disarmed, receive email/text message notifications for non-alarm activity reported by sensors including: door, window, cabinet, motion, and other various sensors. The Alarm.com module communicates ALL sensor and system activity that occurs 24/7 to Alarm.com’s Network Operations Centers, then sends customized notifications to selected recipients.
• Sensor-Left-Open

  Receive email/text message notifications if a particular door, cabinet, or window sensor is left open for an extended period during specified time frames. Receive a Restoral Notification once the sensor is closed again.
• Image Capture on Alarm

  Capture motion activated images during system alarm events; up to 5 sets of images are automatically uploaded per event.

Options and Ordering

Self Interactive Enhanced

$15.95and up*

$15.95and up*

• Cellular Connectivity

  Enables wireless alarm signal communication to Alarm.com as the primary or redundant signal path. No phone line or Internet connection is needed. US only.
• No Contract

  We offer all alarm monitoring plans with NO CONTRACTS. No long-term, multi-year commitments. We do offer pre-pay discounts for annual (15%) or just go month to month. Your choice and never any pressure to change.
• Crash & Smash Protection

  Alarm.com exclusive and patented technology, enables alarm signal transmission even if the security system is destroyed or disabled by an intruder. This happens during dialer delay period, entry delay or alarm dialing process on the Self-Interactive-Basic, Self-Interactive-Enhanced and Self-Interactive Gold packages.
• Daily Supervision

  Monitor panel connectivity with signal supervision between the control panel and Alarm.com to know when a panel is not responding.
• Remote Arming/Disarming

  Arm/disarm system remotely via web or mobile apps.
• System Status and Summary of Recent Activity

  View an at-a-glance summary showing the current system status and any recent activity at the property via web or mobile apps
• User Code Management

  Add/delete/edit user codes remotely, and track which users arm/disarm the system at what times. For systems with multiple partitions, choose which partition(s) each user code can access.
• Searchable 60-Day Event History

  Search a 60-day history of events reported by the system, including alarms and other activity, via web or mobile apps. Customize the time frame of the search, and filter by device or event type. Download results as HTML or Excel files.
• Multiple Permission-Based Web Logins

  Create different “sub-users” for the account and grant varying levels of permissions for each user to view/change various settings in the Alarm.com online account.
• Multiple Partition Support

  For compatible GC3, iotega, IQ Panel 2, Concord, NetworX, and Neo control panels with multiple partitions, arm or disarm individual partitions via the web, add and assign new user codes to a specific set of partitions, see which sensors are in which partition, and filter the online event history by partition.
• Multi-System Access

  Access multiple security systems from a single account through a convenient drop-down menu in the Alarm.com online account and mobile apps. Great for primary home and vacation home.
• Alarms

  Receive email/text message notifications for any type of alarm reported by the security system.
• Arming/Disarming

  Receive email/text message notifications from Alarm.com when the security system is armed or disarmed.
• System Events

  Receive email/text message notifications for power failures, sensor tampers and malfunctions, panel low battery, and other types of system events.
• No-Show Alerts

  Receive email/text message notifications if a certain person did not disarm the security system during selected times on chosen days.
• Arming Reminders

  Receive email/text message notifications if the security system is not armed by a particular time on chosen days.
• Geo-Services

  Intelligently trigger arming reminders and events based on Geo-Fence settings and mobile phone location.
• Sensor Activity Monitoring - 50 Sensors

  Even when the security system is disarmed, receive email/text message notifications for non-alarm activity reported by sensors including: door, window, cabinet, motion, and other various sensors. The Alarm.com module communicates ALL sensor and system activity that occurs 24/7 to Alarm.com’s Network Operations Centers, then sends customized notifications to selected recipients.
• Sensor-Left-Open

  Receive email/text message notifications if a particular door, cabinet, or window sensor is left open for an extended period during specified time frames. Receive a Restoral Notification once the sensor is closed again.
• Image Capture on Alarm

  Capture motion activated images during system alarm events; up to 5 sets of images are automatically uploaded per event.
• Unexpected Activity Alerts

  Receive alerts whenever unexpected activity occurs, based on learned activity patterns. Alerts based on user face recognition are also available on select panels only and require the customer to opt in.
• Lights

  Send commands to turn lights on/off via web or mobile apps. Create automated light schedules to have specific lights turn on at certain times, for specified lengths of time. Create rules so a specific light turns on if a certain sensor is activated.
• Locks

  Remotely control door locks via web or mobile apps, see lock status (locked/unlocked) and receive email/text message notifications when a lock is accessed by a specific user.
• Thermostats

  Remotely control thermostat(s) via web or mobile apps and easily create custom schedules to set temperatures based on time of day, day of week, activity patterns and the status of the security system to make properties run more efficiently
• Garage Door Control

  Remotely manage and control garage doors via web or mobile apps. View garage door status, receive garage door alerts and close automatically when system is armed.
• Irrigation Control

  Remotely monitor and control Rain Bird or Rachio irrigation systems from the mobile app.
• Audio Integration

  Use the mobile app to control music and audio from the Legrand On-Q® Digital Audio System
• LiftMaster® Integration

  Integration with any supported LiftMaster product
• Lutron® Integration

  Integration with any supported Lutron product.

Options and Ordering

Self Interactive Gold

$18.95and up*

$18.95and up*

• Cellular Connectivity

  Enables wireless alarm signal communication to Alarm.com as the primary or redundant signal path. No phone line or Internet connection is needed. US only.
• No Contract

  We offer all alarm monitoring plans with NO CONTRACTS. No long-term, multi-year commitments. We do offer pre-pay discounts for annual (15%) or just go month to month. Your choice and never any pressure to change.
• Crash & Smash Protection

  Alarm.com exclusive and patented technology, enables alarm signal transmission even if the security system is destroyed or disabled by an intruder. This happens during dialer delay period, entry delay or alarm dialing process on the Self-Interactive-Basic, Self-Interactive-Enhanced and Self-Interactive Gold packages.
• Daily Supervision

  Monitor panel connectivity with signal supervision between the control panel and Alarm.com to know when a panel is not responding.
• Remote Arming/Disarming

  Arm/disarm system remotely via web or mobile apps.
• System Status and Summary of Recent Activity

  View an at-a-glance summary showing the current system status and any recent activity at the property via web or mobile apps
• User Code Management

  Add/delete/edit user codes remotely, and track which users arm/disarm the system at what times. For systems with multiple partitions, choose which partition(s) each user code can access.
• Searchable 60-Day Event History

  Search a 60-day history of events reported by the system, including alarms and other activity, via web or mobile apps. Customize the time frame of the search, and filter by device or event type. Download results as HTML or Excel files.
• Multiple Permission-Based Web Logins

  Create different “sub-users” for the account and grant varying levels of permissions for each user to view/change various settings in the Alarm.com online account.
• Multiple Partition Support

  For compatible GC3, iotega, IQ Panel 2, Concord, NetworX, and Neo control panels with multiple partitions, arm or disarm individual partitions via the web, add and assign new user codes to a specific set of partitions, see which sensors are in which partition, and filter the online event history by partition.
• Multi-System Access

  Access multiple security systems from a single account through a convenient drop-down menu in the Alarm.com online account and mobile apps. Great for primary home and vacation home.
• Alarms

  Receive email/text message notifications for any type of alarm reported by the security system.
• Arming/Disarming

  Receive email/text message notifications from Alarm.com when the security system is armed or disarmed.
• System Events

  Receive email/text message notifications for power failures, sensor tampers and malfunctions, panel low battery, and other types of system events.
• No-Show Alerts

  Receive email/text message notifications if a certain person did not disarm the security system during selected times on chosen days.
• Arming Reminders

  Receive email/text message notifications if the security system is not armed by a particular time on chosen days.
• Geo-Services

  Intelligently trigger arming reminders and events based on Geo-Fence settings and mobile phone location.
• Sensor Activity Monitoring - 50 Sensors

  Even when the security system is disarmed, receive email/text message notifications for non-alarm activity reported by sensors including: door, window, cabinet, motion, and other various sensors. The Alarm.com module communicates ALL sensor and system activity that occurs 24/7 to Alarm.com’s Network Operations Centers, then sends customized notifications to selected recipients.
• Sensor-Left-Open

  Receive email/text message notifications if a particular door, cabinet, or window sensor is left open for an extended period during specified time frames. Receive a Restoral Notification once the sensor is closed again.
• Image Capture on Alarm

  Capture motion activated images during system alarm events; up to 5 sets of images are automatically uploaded per event.
• Unexpected Activity Alerts

  Receive alerts whenever unexpected activity occurs, based on learned activity patterns. Alerts based on user face recognition are also available on select panels only and require the customer to opt in.
• Lights

  Send commands to turn lights on/off via web or mobile apps. Create automated light schedules to have specific lights turn on at certain times, for specified lengths of time. Create rules so a specific light turns on if a certain sensor is activated.
• Locks

  Remotely control door locks via web or mobile apps, see lock status (locked/unlocked) and receive email/text message notifications when a lock is accessed by a specific user.
• Thermostats

  Remotely control thermostat(s) via web or mobile apps and easily create custom schedules to set temperatures based on time of day, day of week, activity patterns and the status of the security system to make properties run more efficiently
• Garage Door Control

  Remotely manage and control garage doors via web or mobile apps. View garage door status, receive garage door alerts and close automatically when system is armed.
• Irrigation Control

  Remotely monitor and control Rain Bird or Rachio irrigation systems from the mobile app.
• Audio Integration

  Use the mobile app to control music and audio from the Legrand On-Q® Digital Audio System
• LiftMaster® Integration

  Integration with any supported LiftMaster product
• Lutron® Integration

  Integration with any supported Lutron product.
• Image Capture on Alarm

  Capture motion activated images during system alarm events; up to 5 sets of images are automatically uploaded per event.
• Image Capture on Disarm

  Capture images during disarm events. Images can be uploaded to the image gallery.
• Daily Views Rules

  Create rules to upload and send motion activated images captured during a specific time period.
• On-Demand Peek-In

  Request system images on-demand to be uploaded immediately or upon next motion detection.
• Additional Image Upload

  Upload additional images that were captured by the sensors and not automatically uploaded, such as extra alarm, entry delay or disarm images.
• Image Alerts

  Receive email/text message image alerts on images captured during alarms, Daily Views, or Peek-In requests.

Options and Ordering

Easy Same-Day Switch!

We are here 9am – 8pm EST, 7 days a week handling alarm monitoring takeovers

Free Technical Support

Sign Up Now!

Steps Involved

• Make the purchase for UL Central Station Alarm Monitoring.  If you have an Alarm.com compatible cellular or dual-path cellular/Internet communicator select Alarm.com Alarm Monitoring.  Select billing period: Monthly, Six Months, Annual.  We get a prepay discount from our UL central station provider which we pass on to our customers.  Annual billing comes with a 15% discount for example.  This is NOT a contract, rather a prepay discount. 

If your communicator is compatible with Interactive Services such as remote arm/disarm (Basic) or Z-Wave home automation (Enhanced), select these services as well if desired.  Internet or cellular service required for Interactive Services, not landline.

• Complete our Alarm Monitoring Enrollment Form.  This details your address, telephone number to verify alarm before dispatch, passcode to validate user, zone information, etc.
• Schedule your activation time and date.  In general we can get you online same day but we are here 7 days a week so pick a time convenient for you.
• Change the account number in your control panel.  We will help you over the phone to make this minor change from your keypad.  This is where the Installer Code comes in.  If using the Telguard TG1 this step is not necessary because we will remotely program the cellular communicator with a new account number.
• Test the changes.  We will have you arm your alarm system then trip a few zones to verify  signals are being properly received by the central station.  Its important we test all life safety zones such as smoke or carbon monoxide detectors!
• We put your monitoring account online.  You are now fully protected with UL central station monitoring!
• You will receive an email (generally within 30 minutes of going online) showing your account’s data with the central station.  Review this information to make sure your telephone numbers, address, etc. are correct.  You will also receive an Alarm Monitoring Certification for your homeowner insurance agent.  Most give a 10% – 20% annual premium discount for a monitored alarm system so its important to have this document.

Easy Same-Day Switch!

We are here 9am – 9pm EST, 7 days a week handling alarm monitoring takeovers

Free Technical Support

Sign Up Now!