2GIG eSeries Enhanced Wireless Hardwire Takeover Module

2GIG eSeries Enhanced Wireless Hardwire Takeover Module

$74.95

This unit is designed to convert 8 hardwired zones into eight wireless zones, make installation simple, and work with existing 12‐volt control panels. The module is to be mounted next to the existing Control Panel where the hardwired zones are connected. All of the zones on the Super Switch act as supervised wireless zones.

SKU: A-GG-TAKE1E345 Categories: , Tags: ,

Description

Super Switch Encrypted Wireless Takeover Module

Are you looking to upgrade an existing wired security system to a wireless one? Whether you are replacing an older, wired security system or want to retrofit the pre-wired security sensors common to new construction, the Super Switch is 2GIG’s wireless takeover module. This unit was designed to convert 8 hardwired zones into eight encrypted wireless zones, make installation simple, and work with existing 12‐volt control panels. The module is to be mounted next to the existing Control Panel where the hardwired zones are connected. All of the zones on the Super Switch act as supervised wireless zones.
For use with the 2GIG GC2e, GC3e, or Edge panels only.

Features

  • Converts hardwired loops into as many as 8 wireless zones
  • Converts 8 zones per module (additional takeover modules may be added)
  • Operates at 9-16 VDC, 50 mA
  • Can be powered by and use backup battery of an existing 3rd party Control Panel
  • Not for use with life safety devices such as smoke detectors or carbon monoxide detectors
  • ETL Listed

Specifications

  • Wireless Signal Range: 350 ft, open air with 2GIG Wireless Control Panel
  • Code Outputs: For each of 8 serialized zones: Fault; Restore; Tamper; Low Battery
  • Transmitter Frequency: 345.00 MHz (crystal controlled)
  • Transmitter Frequency Tolerance: ±15kHz
  • Transmitter Bandwidth: 24kHz
  • Unique ID Codes: Over one (1) million different code combinations
  • Supervisory Interval: 70 minutes
  • Peak Field Strength: Typical 50,000 uV/m at 3m
  • Sensor Dimensions (L x W x H): 3.54 x 2.56 x 1.13 in. (9.0 x 6.5 x 2.9 cm)
  • Weight (including battery and bracket): 2.85 oz. (80.8 g)
  • Housing Material: ABS Plastic
  • Color: White
  • Operating Temperature Limits: 32°F (0°C) to 120°F (49°C)
  • Relative Humidity: 5-95% Non-Condensing
  • Operating Voltage: 9-16 volts DC, 50mA

Additional information

Brand

System

Edge, GC2e, GC3e
Model

Edge, GC2e, GC3e

Related products