SafeHomeCentral

Tag: 2GIG

  • 2GIG GC2 Firmware Update Files

    2GIG GC2 Firmware Update Files

    2GIG-UPCBL2 Firmware Update CableAlarm.com Cellular Communicator For 2GIG GC2

     

    The new 4G LTE cellular communicator needed for Alarm.com service requires a firmware version of at least 1.19.3 or higher just to recognize the new cell card.  If you have purchased the 2GIG-UPCBL2 cable needed to flash the GC2 firmware yourself without incurring an Over-The-Air (OTA) cellular charge from Alarm.com below is the instructions and Windows PC software needed to update your GC2 firmware.  Inside the zip file is the firmware for the GC2 itself as well as firmware for the TS1 keypad if you are using one.  Your current GC2 firmware MUST be at least V1.9 to use this update.

    Firmware Update Instructions

    Firmware Update files (V1.19.3)

     

     

    Need an update cable?  2GIG-UPCBL2.

     

    [ux_banner height=”200px”]

    [text_box width=”72″ position_x=”50″ position_y=”50″]

    WAS THIS POST HELPFUL?

    Did you know we offer alarm monitoring from just $8.95 a month – no contract?

    [button text=”Learn More” color=”secondary” radius=”15″ link=”https://diyalarms.net/no-contract-security-system-monitoring-from-8-95/” target=”_blank”]

    [/text_box]

    [/ux_banner]

  • 2GIG Rely DIY Wireless Home Security System Review – 2019

    2GIG Rely DIY Wireless Home Security System Review – 2019

    2GIG Rely Wireless Home Security Kit 2GIG Rely Powered By SecureNet

     

     

     

     

     

    The 2GIG Rely wireless alarm kit is fast becoming our top seller for condos, apartments, townhouses, or frankly any home that only needs a maximum of 16 wireless devices or zones.  The Rely is a professional grade home security system designed to be fast and easy to setup, like under an hour!  The system is an all-in-one type of wireless alarm where the keypad, siren, wireless receiver, cellular radio, and brains is packed into one compact, yet attractive housing.  If installed in a rental unit it can be packed up and moved to your new location rather than leaving behind.

    The key advantage of this kit which includes the Rely main control/keypad, three wireless door/window sensors, wireless motion sensor, and even a wireless keyfob is price – just $199.95.  Because it’s made by 2GIG which has grown to be a real player in the home security market is that all their various wireless sensors will work with Rely making expansion and customization easy.  What’s more Honeywell’s 5800 series wireless units also are compatible with Rely which means there is a WIDE range of sensors to choose from like smoke detectors, Carbon Monoxide detectors, various models of motion sensors, various models of glassbreak sensors, a slew of wireless door and window sensors, panic buttons, you name it.

    2GIG Rely Kit Use

    The 2GIG Rely is geared for small homes where expansion beyond 16 wireless sensors is not required.  This keeps the kit price point low.  But even at just under $200 it includes an ATT cellular communicator which is hard to find in any prepackaged security kit below $300.  The key advantage of cellular central station alarm monitoring is there is no risk of line tampering outside the home or apartment and of course no expensive landline required.

    Cellular Alarm Monitoring by SafeHomeCentral.comThe cellular communicator works with SecureNet for remote interactive services which is another top player in the security market.  The SecureNet SmartLink app allows users to remotely arm and disarm their Rely control, check on status, and view SecureNet cameras if connected to the system.  We’ve used SmartLink for a lot of years now and it works well with many other systems we sell such as the DSC iOtega or Alula Connect+/Helix.

    The only real negatives with Rely is it can not be expanded beyond 16 zones, but that was by design since its targeted for small homes.  Also, there is no built-in home automation (Z-Wave) capability with Rely.  There is a workaround however if you use Amazon’s Alexa or Google Home which both integrates with SmartLink.

    Encrypted TransmissionOne other point to mention is the wireless sensors are not encrypted.  While this is not a major disadvantage unless you have museum quality artwork at home, it is a point to consider.  Newer systems such as the Honeywell Lyric or DSC iOtega offer fully encrypted sensors but expect these kits even without a cellular communicator to cost double.  I still have Honeywell 5800 series wireless transmitters (which can work with Rely) in my own home and have no plan to upgrade these sensors.

    There are two options for setting up your 2GIG Rely system.  The first is using the SecureNet SmartLink app.  SafeHomeCentral would give you an activation code that you just enter under the “Setup New System” link in SmartLink.  The other option is to have SafeHomeCentral remote program the entire system for you once the kit arrives.  We just talk with you over the phone and ask where you are placing each sensor, what its serial number is, and what the description should be for display on the keypad such as “Front Door”.

    2GIG Rely Using Included Desk StandThe Rely system/keypad itself can mount on the wall but also includes a desk stand which means no routing of the AC power cord within the wall which is the only wired component in the entire system.  Most customers just sit the Rely keypad on a kitchen countertop or desk using its stand plugging into the nearest AC wall outlet.  There is a built-in rechargeable backup battery that keeps the system up and running for 8 hours in the event of a power outage.  Once the power comes back on the backup battery will trickle charge back up.  2GIG recommends replacing the backup battery every 5-6 years.

    The batteries in the wireless sensors are Lithium and designed to last about five years before requiring replacement which are readily available online and even Walmart.

    2GIG Rely Door Sensor InstallationWe were able to mount each of the door/window sensors easily using the provided self-stick tape.  In general, I like using screws but if this is a rental property for example then by all means use the tape which holds tight.  For doors just mount the transmitter on the wood trim and matching magnet on the door.  There is a notch on the side of the transmitter showing how to align the magnet which must be spaced no father than ¾” when the door is closed.

    2GIG-PIR1-345 Wireless Motion DetectorThe motion detector did not come with two-sided tape, so I used the two supplied screws to mount it at a height of 7’ in a corner of the room.  If you don’t want to put any holes in the wall just buy a small amount of two-sided tape at CVS or Walmart.  The motion detector is very light, so it will stick to the wall OK.  Just be careful not to pull off any paint from the wall if removing later.

    The included keyfob fits right on your keychain and looks like a car alarm remote.  It has four buttons:  Arm Away, Arm Stay, Disarm, and Panic.  The range was just perfect when testing.  Could be at the curb to disarm or trigger a panic alarm if needed.  Of course you can also arm and disarm the system from the SmartLink app loaded on your cell phone too.  This is handy when at the office and wondering did you really set the alarm when rushing out that morning.  Just open the app, check status, and take appropriate action such as Arm Away.

    2GIG Rely at Home

    If you live in a small home and looking to install a professional grade security system yourself on a budget, then the 2GIG Rely is one to consider.  Its simple to install and certainly fast and hard to beat the price for a real alarm system with cellular connectivity to a central station!

    Check out our other wireless system reviews for 2019 as well:

    DSC iOtega

    Honeywell Lyric

    Alula Connect+ (Helix)

     

    [ux_banner height=”200px”]

    [text_box width=”72″ position_x=”50″ position_y=”50″]

    WAS THIS POST HELPFUL?
    Did you know we offer alarm monitoring from just $8.95 a month – no contract?

    [button text=”Learn More” color=”secondary” radius=”15″ link=”https://diyalarms.net/no-contract-security-system-monitoring-from-8-95/” target=”_blank”]

    [/text_box]

    [/ux_banner]

  • 2Gig Glass Break Detector

    2Gig Glass Break Detector

    2Gig-GB1

    A glass crack detector is utilized for household or organization stability to check massive panes of glass. Most massive home windows do not open but this can make them primary targets for burglars. Burglars can hurl a brick or rock through the window to achieve accessibility. Since these parts are not secured by a window make contact with the intruder may be undetected.

    A break detector uses a microphone to detect frequencies in the array of glass breaking. When the detector hears the glass breaking it triggers an alarm on your security method. These products are generally a 24 hour system. This implies that the glass is constantly staying monitored for breakage. A break detector will trigger an alarm in equally away and keep modes of operation.

    Utilizes of a Glass Crack Detector

    This form of detector can be applied to keep an eye on numerous home windows at once. As very long as there is a line of site to the home windows so the audio of breaking glass is not impeded. If you have a area with many windows it can be utilised to preserve income by applying fewer gadgets. Several alarm installers are advocates of employing a detector as a substitute of window contacts to save dollars. Each individual circumstance should be regarded separately. If you only use a glass split detector and an intruder pry’s your window open up then the detector will not result in an alarm. The most essential part of a house security system is the perimeter of your dwelling. This is where you want to halt a thief. If an intruder triggers your alarm whilst they are even now outdoors the burglar will most probable run absent fairly than continue to the inside of your household. After they get entry to the within of your household there will most very likely be injury accomplished or goods stolen.

    Set up of Glass Split Detectors

    The split detector is normally mounted opposite to the window that is to be safeguarded or on the adjacent wall. It must be in a spot that is unimpeded so that the seem of the breaking glass can be very easily detected. The system is commonly mounted on a ceiling but can be located on the wall. The glass window to be monitored ought to be framed into the wall and be no more compact than 11×11 inches.

    The 2Gig-GB1 glass crack detector can be utilised to watch glass with a bare minimum thickness of one quarter inch to just one quarter inch for plate glass and tempered glass. The sensor will run up to 15 toes from the glass. The gadget can be situated up to 300 feet from the 2gig GoControl panel.

    Testing of Crack Sensors

    As with all property protection products you have to test the device just after set up. A glass crack sensor is a bit much more challenging to exam mainly because you can’t break the home windows in your property to exam the device. This is exactly where you must use a glass break simulator to test your glass break machine. The 2gig-gb1 detector has a developed in RF examination to make certain that the handle panel can detect an alarm.

    Supply by William J Robinson

    [ux_banner height=”200px”]

    [text_box width=”72″ position_x=”50″ position_y=”50″]

    WAS THIS POST HELPFUL?
    Did you know we offer alarm monitoring from just $8.95 a month – no contract?

    [button text=”Learn More” color=”secondary” radius=”15″ link=”https://diyalarms.net/no-contract-security-system-monitoring-from-8-95/” target=”_blank”]

    [/text_box]

    [/ux_banner]