UltraTech IM-1270 12VDC 7AH Backup Battery

Name: UltraTech IM-1270 12VDC 7AH Backup Battery
Brand: Ultratech
SKU: A-IM-1270
Availability: InStock

$28.95

Standard security system backup battery for all make wired security systems.

SKU: A-IM-1270 Categories: Battery, Power Tags: Security, UltraTech

Description

Ultratech Power Products UT 1270 12V 7Ah Sealed Lead Acid Alarm Battery

Which alarm batteries do technicians, installers, and security professionals choose when buying 12 Volt 7 Amp Hour SLA Backup Alarm Batteries?

UltraTech Power Products UT 1270, time and time again. UltraTech Power Products is known to be the most reputable brand in the country. When choosing a 12 Volt 7 Amp Hour SLA battery, the UltraTech UT 1270 is the ideal backup power source.

Here are a few reasons the UT 1270 (commonly known as the IM-1270) is recognized as the best in the industry:

• 2 Year Manufacturer’s Warranty – (Covers Defect Only, not Lifespan)
• Highest quality parts in the industry: ISO 9002 Certified
• Easy Installation
• Rechargeable
• Non-Spillable: Can be operated in any position without leakage

This battery is the direct replacement for all previous versions of UltraTech UT1270.

Ultratech batteries are often found in burglar alarm systems, fire alarm systems, access control systems, low-voltage lighting, uninterruptible power supplies (UPS) systems, as well as other security and battery backup applications. Both Residential and commercial Alarm panels made by Honeywell Ademco, Napco, DSC and GE are common applications of the UltraTech UT 1270. The UT1270 is also used to replace existing 12V 7AH batteries found in UPS and Battery Backup Systems.

Terminals: Fast-on F1 (0.187”) Connectors

Battery Specifications:

20Hr. rate of 0.35A to 10.5V 7Ah
10Hr. rate of 0.65A to 10.5V 6.5Ah
5Hr. rate of 1.20A to 10.2V 6Ah
1Hr. rate of 4.20A to 9.6V 4.2Ah

Weight (approx.): 5.42 pounds (2.46kgs.)

Energy Density (20Hr. rate) – 1.46WH/ cubic inch (89.4WH/ liter)

Maximum Discharge Current with Standard Terminals – 35A Amperes

Charge Retention (shelf life) at 60° F (20° C) :

1 Month 97%
3 Month 91%
6 Month 85%

Life Expectancy:

Standby use – 3 to 5 years

Cycle use (approx.) – 100% Depth of Discharge 250 cycles, 50% Depth of Discharge 550 cycles, 30% Depth of Discharge 1200 cycle.

UltraTech Alarm Battery Installation Guide

Most alarm panels traditionally give indication of a low battery on the keypad. After ordering a replacement UltraTech battery, here’s how to replace the battery in your alarm panel with the new UltraTech replacement battery.

1) Remove the existing battery, by disconnecting the two (typically red and black) leads attached to the metal contacts on the battery

2) Attach the new replacement UltraTech Alarm Battery, matching the red and black lead wires to the same metal terminals taking note to connect the red lead to the metal terminal with plastic underneath it and the black to black

3) Wait one to five hours, as it may take up to five hours for the low battery indicator to disappear from your connected keypad

After following the above steps, your UltraTech Alarm Battery should be completely operational and functional and able to provide battery backup power in case your alarm system is involved in another blackout, brownout or any other inconsistent power situations.

Your original UltraTech Alarm Battery that you have now replaced, is fully recyclable and in most states it is illegal to dispose of it any other way. They are typically recycled at full service auto mechanics, but check the local waste management officials in your area for exact disposal procedures.