Honeywell Vista 20P Control Panel
$139.95
The high capacity, feature-rich VISTA-20P lets you deliver more value to your customers on each and every sale with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions.
Description
The high capacity, feature-rich VISTA-20P lets you deliver more value to your customers on each and every sale with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet Internet or digital communicator can be installed in premises without TELCO lines with no sacrifice in functionality. The panel’s installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.
Includes transformer. Battery purchased separately!
Features
- IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G
- Supports four graphic touchscreen keypads
- Wireless keys can be programmed without using zones
- Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
– 40 hardwire expansion zones
– 40 wireless expansion zones - Two low current on-board trigger outputs
- 100 Event Log viewable at system keypads with time/date stamp
- 48 system user codes assignable to either partition
- Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
- Two independent partitions plus a common partition
– Global Arming from any system keypad
– Go to function to view or operate one partition from the other
– Separate partition account numbers - 16 output devices
– Relays (Model 4204 Relay Modules, or 4229 Expansion Module) - Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
- Supports four-wire and up to 16 two-wire smokes
– Works with Sentrol CleanMe™ maintenance signal - Multiple actions on output devices depending on system state
– Turns lights off when system arms
– Turns the same light on when system disarms
– Flashes same lights when system is in alarm - Built-in phone line cut monitor with programmable delay and annunciation options
– Display on system keypads
– Trigger local sounders
– Trigger system bell
Security Dealer Features
- Automatic System Load Shed
– During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries. - Dynamic Signaling
– Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio
Valuable End-User Features
- Viewable on system keypads:
– Exit countdown
– Time and date display*
– Event log* - Auto keypad backlighting on entry
- Keyswitch arming
- Programmable macro buttons and single-button arming
- Supports a variety of wireless remote controls for single-button operation
- User Scheduling
– Latchkey reports to pagers
– Auto arm/disarm
– “User access” time windows - VIP Module allows system control from any touchtone phone
- Chime by zone
Note: *Requires custom alpha keypad (ex. Honeywell 6160 Alpha Keypad) for local programming!
Manuals
Reviews (0)
Be the first to review “Honeywell Vista 20P Control Panel” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.