Vanguard Security Corporation -
Honeywell Security Products Dealer
Glassbreak Sensors
work by "listening" for the sound of breaking glass in a window.  
"Shock" glassbreak detectors are mounted on the window and "feel"
the shock of breaking glass. This kind of advanced wireless
technology can provide shatter and shock protection for your windows,
for often intruders are "sensed" and an alarm sounded while they are
still outdoors. This is often enough to send a burglar running!

FG-1625SN  V-Plex Glassbreak Detector
FG1625SN is specifically designed to allow a fast, easy installation
by utilizing V-Plex polling loop technology. Four adjustable sensitivity
settings can compensate for the acoustics of any room. Optimum
operation can be quickly verified using the FG-701 Glassbreak
supporting V-Plex (polling loop) technology.

FlexCoreTM Signal Processor
The FlexCore Signal Processor is an Application-Specific Integrated
Circuit (ASIC), which processes sound data in parallel rather than
sequentially for faster, more accurate detection decisions. The
combination of proven FlexGuard ® performance with the speed of
FlexCore processing provides unmatched false alarm immunity
without compromising detection.

V-Plex Polling Loop Technology
V-Plex devices are installed using two wires for power and data. In
addition, V-Plex technology features Point Identification, allowing
users to quickly pinpoint the source of an alarm or trouble condition.

Easy Installation and Setup
ADEMCO’s patented technology allows remote activation of Test
Mode (with simulator). The FG1625SN has a centered wire entry
hole, 45° terminal blocks, and EOL terminals. A hand-clap feature
verifies that the detector is functioning.

Selectable Sensitivity
Two dip switches on the FG1625SN make it easy to set the
sensitivity to match the acoustics of the room. Four different
sensitivity levels are available, ranging from very low to high. The
range can then be verified remotely with the FlexGuard FG-701
Glassbreak Simulator.

Mount the Detector Anywhere
Mounts on any wall, in the window frame, or on the ceiling, with no
minimum range and a maximum range of 25’ (7.6 m) to the glass.

Covers All Glass Types
The FG1625SN works on all glass types, including plate, tempered,
laminated, wired, film-coated, and sealed insulating glass.

Multiple Domain Signal Analysis
The FG1625SN performs Multiple Domain Signal Analysis in which
time, frequency and amplitude characteristics are evaluated for
signal qualification. This enables the detector to accurately
discriminate false alarms from true glassbreak events.

Enclosed PC Board
The PCB is protected from potential damage during installation.

Patented Remote Test Mode
The Patented Remote Test Mode can enable or disable the
indicator LEDs using the FG-701 Glassbreak Simulator. The unit
automatically resets from Test Mode in five minutes.

Mounting Locations
The FG1625SN can be mounted on the ceiling, opposite wall,
adjoining wall, or the same wall as the glass.

Install Sheet

Vanguard Security Corporation
DIY Ademco Wireless Home Security Systems
Your Wireless Home Security System Experts